Scrambled fuel trim values

cornerstone · **Joined:** Tue May 19, 2009 9:23 am **Posts:** 9

When I enter individual cylinder fuel trim values (+/- 15 %), they seem to save but when then bin file is opened up, the values are scrambled.

Has anyone else noticed this? Are the actual values still working despite not displaying properly?

Using WinTEC4 4.8.19 with a TEC3.

Jon@EMI · **Posted:** Wed Aug 19, 2009 9:07 am

For what engine type is your BIN file set? I'll take a look.

You could also send me your file and I can look at that too.

cornerstone · **Joined:** Tue May 19, 2009 9:23 am **Posts:** 9

My engine is set up as 6 cylinder, sequential.

Jon@EMI · **Posted:** Fri Aug 21, 2009 9:27 am

Good catch. The issue is just a display problem so what you initally typed in will be used when progrmming the unit, but after reopening the file the values will appear in the wrong place. If you don't touch the values, even reprogramming will not cause a problem. If you type the new value you want in the cylinder you want, you will get that adjustment as expected.

I'll have this fixed in the next release.

Scrambled fuel trim values

Who is online